sales@ivojo.co.uk
01348 840080
Lightware UMX-HDMI-140-Plus
4:1 HDMI/DVI/DisplayPort/VGA to HDMI multi-format presentation switcher
1 × HDMI, 1 × DVI-I, 1 × DisplayPort, 1 × VGA inputs; 1 × HDMI output
£1160 (£1392.00 inc. VAT)
Availability: Please Call
Availability: Please Call
Lightware UMX-HDMI-140-Plus (91560003)
The Lightware UMX-HDMI-140-Plus switches universal 4K video and audio to an HDMI output port. This device was designed for digital and Analogue video and audio signals: VGA, YPrPb, DVI, HDMI 1.4 and DP 1.1 with Analogue stereo audio from local inputs or embedded 7.1 HBR audio. The unit can also handle HDCP encryption. Analogue signals (both audio and video) are converted into digital format. UMX-HDMI-140-Plus can be mounted on a rack shelf or used stand-alone. UMX-HDMI-140-Plus is compatible with HDMI extenders and matrix switchers.
Using the factory, custom or transparent EDID emulation the user can fix and lock EDID data on each input connector. Advanced EDID Management forces the required resolution from any video source and fixes the output format conforming the system requirements. With the built-in Event Manager control feature this device is the ultimate solution for huddle rooms and similar collaboration environments.
Lightware UMX-HDMI-140-Plus Key Features
- Cisco VC room integration compatibility
- Advanced control feature pack for 3rd party video conference collaboration
- Digitizes VGA, YUV Analogue input formats and converts to HDMI or DVI
- 3,5mm audio jack input
- 1920x1080@120Hz/4:4:4, 4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
- Audio embedding (or replace original audio)
- Adjustable Analogue audio settings (volume, gain, balance)
- Frame Detector (analyze detailed video timings)
- Compatible with Mac laptop and desktop computers with Thunderbolt port
- 5-pole Phoenix balanced Analogue audio connectors
- Mounting options for rack, furniture or truss
- External universal power adaptor
- Twist-and-lock DC power connector
- Supports several embedded audio formats (including PCM, Dolby Digital and DTS)
- DVI-I (Analog+Digital) input connection
- HDCP enable/disable function on input
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- Multiple TCP/IP connections
- Device control via Ethernet (TCP/IP) and RS-232
- Advanced EDID Management
- Intuitive control software for device configuration
- GPIO control ports
- Front panel buttons for crosspoint control
- Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps)
- Command injection on RS-232 and IR ports
- Autoselect modes to automatically switch video and audio (first detect, last detect, priority)
- Built-in Event Manager control automation feature
- Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
- Pixel Accurate Reclocking
- No video compression
- Bi-directional RS-232 extension (pass-through)
- HDCP 1.4 compliant
- Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock)
- Cross compatible with TPS series Lightware extenders and I/O boards (HDBaseT compatible)
- Firmware upgrade through Ethernet
- Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
- Built-in video test pattern generator
- No signal latency, zero frame delay
- Order Code: 91560003
Lightware UMX-HDMI-140-Plus Downloads
Lightware UMX-HDMI-140-Plus Specifications
| Digital Video Input | HDMI connector, DVI-I connector, DisplayPort |
| Analogue Video Input | VGA connector |
| Audio Input | Stereo jack, 5-pole Phoenix |
| Ethernet | RJ45 |
| Control | 7 × GPIO, IR |
| Serial Port | 3-pole Phoenix |
| Power | Locking DC connector (2.1 / 5.5 mm) |
| Resolution: | Up to 4K UHD 3840×2160@30Hz, 1600 × 1200@60Hz, FullHD 1920 × 1080@60Hz |
| Digital Audio Formats: | Digital audio formats: Supports up to 8 channel |
| PCM, Dolby TrueHD and DTS-HD Master Audio 7.1 formats | |
| Input Cable Equalization: | Automatic max 20 m |
| EDID Emulation: | Advanced EDID Management |
| EDID Memory | 119 factory preset, 15 user programmable |
| VGA To Digital Conversion | 0 microseconds delay |
| HDCP Pass-through | Yes |
| RS-232 (control Option) | 9600, 19200, 38400, 57600, 115200 bps (default: 57600) |
| Local Power | Universal power adaptor |
| Power | Universal power adaptor, DC 12V 2A |
| Power Consumption | 8W (max) |
| Enclosure | 1 mm metal |
| Dimensions | 221 W × 100.4 D × 26 H mm |
| Net Weight | 607 g |
| Compliance | CE |
| Warranty | 3 years |
| *for UHD Resolutions | |
Analogue audio input |
|
| Volume | -96 .. 0 dB |
| Balance | -100 .. 0 .. 100% |
Lightware UMX-HDMI-140-Plus Possible Alternatives
| Product Code | Description | Price | Inc. VAT |
| CYP EL-5400-HBT | 4:1 × 2 Presentation switcher 2 × HDMI, 1 × DisplayPort, 1 × VGA inputs; 1 × HDMI, 1 × HDBaseT-LITE outputs | £718 | £861.60 |
| CYP EL-7300 | 5:1 × 2 HDMI / VGA / Display Port Presentation Switch and Scaler 2 × HDMI, 1 × DisplayPort, 2 × VGA inputs; 1 × mirrored HDMI output | £491 | £589.20 |
| CYP EL-8100V | 5:1 × 2 4K Presentation Switcher/Scaler with HDMI and HDBaseT outputs 1 × USB-C, 2 × HDMI 2.0, 2 × RGBHV inputs; 1 × HDMI, 1 × HDBaseT mirrored outputs; Max. 100m at 4K on HDBaseT output | £852 | £1022.40 |
| SY Electronics MFS51-18G | 5:1 × 2 HDMI 2.0 / DP / VGA Presentation Switcher 3 × HMI, 1 × DisplayPort, 1 × VGA Inputs; 1 × HDMI, 1 × HDBaseT output | £1395 | £1674.00 |